High Performance Differential Probe Supports 3 Types of Measurements
- 제조사
- HIOKI
- 제품명
- DIFFERENTIAL PROBE 9322
- 제품번호
- 9322
Measurement functions |
DC mode: Waveform monitor
output, DC to 10 MHz ±3 dB |
---|---|
Input type |
Balanced differential input |
Output |
Voltage division ratio: 1/1000, BNC terminal (DC/AC/RMS 3-mode selectable output) |
DC amplitude accuracy |
±1 % f.s. (1000 VDC or less), ±3 % f.s. (2000 VDC or less) (f.s.=2000 VDC) |
RMS amplitude accuracy |
±1 % f.s. (DC, 40 Hz to 1 kHz), ±4 % f.s. (1 kHz to 100 kHz) (f.s.=1000 VAC) |
Input resistance, capacity |
H-L: 9 MΩ, approx 10 pF (C at
100 kHz) |
Max. allowable input |
600V AC/DC (CAT III), 2000 VDC, 1000 VAC (CAT II) |
Max. rated voltage to earth |
When using grabber clip: 600 V
AC/DC (CAT III), 1500 V AC/DC (CAT II) |
Power supply |
1) AC ADAPTER 9418-15 (12 VDC
±10 %) *1 |
Dimensions and mass |
70 mm (2.76 in) W × 150 mm (5.91 in) H × 25 mm (0.98 in) D, 350 g (12.3 oz) |
Accessories |
Alligator clips ×2, Grabber clip 9243 ×1 (Red/black each one), Carrying case 3853 ×1, Instruction manual ×1 |
■ How to power the 9322 with Logic terminal on Memory HiCorder*1 Discontinued model *2 Not including the Logic terminals with the Logic Unit 8973, table indicates the number of 9322 that can be powered from the main unit’s logic terminals
Main unit |
Required power cord (s) |
Number of Max. connectable 9322s |
---|---|---|
MR8880-20 |
Power cannot be supplied from the logic terminals | |
MR8875 |
Via the Power Cord 9328
connected to DC output power terminal on the MR8875, up to 3 × 9322 | |
MR8870-20 |
Power cannot be supplied from the logic terminals | |
8870-20 *1 |
Power cannot be supplied from the logic terminals | |
8861-50 8861 *1 |
9324 + 9323 |
2 |
8860-50 8860 *1 |
9324 + 9323 |
2 |
8855 *1 |
9324 + 9323 |
2 |
8847 *1 MR8847-01 *1 MR8847-02 *1 MR8847-03 *1 MR8827 *2 MR8847-51 *2 MR8847-52 *2 MR8847-53 *2 |
9324 + 9323 |
4 *2 |
8841 *1 8842 *1 |
9324 |
1 |
8835-01 *1 8835 *1 |
9324 |
1 |
8826 |
9324 |
4 |
■ How to power the 9322 with F/V Unit 8940’s sensor terminal*1 Discontinued model *2 Not including the Logic terminals with the Logic Unit 8973, table indicates the number of 9322 that can be powered from the main unit’s logic terminals
Main unit |
Required power cord |
Number of Max. connectable 9322s |
Max. connectable 9322s when simultaneously using clamp sensors |
---|---|---|---|
8861-50 8861 *1 |
9325 |
6 |
8 |
8860-50 8860 *1 |
9325 |
6 |
8 |
8841 *1 8842 *1 |
9325 |
6 |
4 |
8835-01 *1 8835 *1 |
9325 |
4 |
4 |
8826 |
9325 |
6 |
6 |
■ How to power the 9322 with a Hioki Memory HiCorder 8860series, or 8855*1 Discontinued model *3 Depends on the combination of Clamp-on probes connected to the 9687; number of connectable 9322 are different
Main unit |
PROBE POWER UNIT 9687 |
Input units 8950, 8952, 8953-10, 8955 [For 8855] |
---|---|---|
|
Use with the Power Cord 9248 |
Use with the Power Cord 9328 |
8861-50 8861 *1 |
8 *3 |
N/A |
8860-50 8860 *1 |
8 *3 |
N/A |
8855 *1 |
|
|