[P9000-01] WAVE mode only: waveform monitor output
Frequency characteristics: DC to 100 kHz, -3 dB
[P9000-02] (selectable) WAVE mode: waveform monitor output, AC-RMS mode: RMS value of the output AC waveform
Wave mode frequency characteristics: DC to 100 kHz, -3 dB
AC-RMS mode frequency characteristics: 30 Hz to 10 kHz; response time: 300 ms (rising) or 500 ms (falling)

1000:1 or 100:1 (selectable)

±0.5% f.s. (f.s. = 1.0 V; voltage division ratio: 1000:1) (f.s. = 3.5 V; voltage division ratio: 100:1)

±1% f.s. (30 Hz to 1 kHz non-inclusive, sine wave),
±3% f.s. (1 kHz to 10 kHz, sine wave)

Between H and L: 10.5 MΩ, 5 pF or less (at 100 kHz)

1000 V AC/DC

1000 V AC/DC (CAT III)

-40 ˚C (-40 ˚F) to 80 ˚C (176 ˚F)

(1) AC Adapter Z1008 (100 to 240 V AC, 50/60 Hz), 6 VA (including AC adapter) or 0.9 VA (probe only)
(2) USB bus power (5 V DC, USB Micro-B receptacle), 0.8 VA
(3) External power (2.7 V to 15 V DC), 1 VA

128 mm (5.04 in)W × 36 mm (1.42 in)H × 22 mm (0.87 in)D, 170 g (6.0 oz)

Input side: 70 cm (2.30 ft) ; output side: 1.5 m (4.92 ft)

Instruction manual ×1, alligator clips ×2, carrying case ×1